Manual Hydraulic Pipe Bender 3.5 Inches Capacity Mandrel Rebar Bender
Characteristics
1, the machine adopts PLC control, conversational operation, simple programmable steps.
2, the freedom of choice, manual, semiautomatic cycle, function of automatic cycle.
3, mobile pedal switch, with automatic startup, emergency stop, stop to three kinds of function, high safety.
4, it has a large capacity and cooling cycle system so that the machine could run more stable.
5, head tube bending, delicate design, provide maximum bending pipe space.
6, it is undersized, simple and convenient to replace elastic production.
7, in the machining process of the screen mobile controller tube bending machining is now worth, still can set single-step action,half cycle, the cycle.
8, with automatic detection errors and faults, when any abnormal function of action or any dangerous when there is a machine.
 | PLC Controller Easy operating and working fast |
| Electrics Schneider, France brand |  |
 | Mortor Yuanbang, Taiwan brand. Bending is drived by hydraulic motor, which can keeps high efficiency and accurate bending angle. |
| Clamping Hydraulic Oil Tube Kejia, China famous brand. |  |
| | Water Cooling System |
 |  |
 |  |
Parameters:
Main specification and technical parameters
| type | bending ability | bending radius | bending angle | power of motor | |
| 38NC | Φ38×2.0 | 200 | 185° | 4kw | 12MPa |
| 50NC | Φ50×2.5 | 250 | 185° | 5.5kw | 12MPa |
| 63NC | Φ63×4.0 | 300 | 185° | 5.5kw | 12MPa |
| 75NC | Φ75×6.0 | 350 | 185° | 7.5kw | 12MPa |
| | | 400 | 185° | 11kw | 12MPa |
| 120NC | Φ120×5.0 | 500 | 185° | 15kw | 12MPa |
| 159NC | Φ159×10 | 550 | 185° | 22kw | 14MPa |
| 168NC | Φ168×14 | 700 | 185° | 22kw | 14MPa |
| 219NC | Φ219×18 | 850 | 185° | 30kw | 14MPa |
The Steps of Pipe Bending Machine
Bend tooling (Include: bend die, mandrel, pressure die, clamping die, wiper die)
Product Tags:
|
|
PLC Mandrel Manual Hydraulic Pipe Bender 3.5 Inches Capacity 89Mm Images
|
